weber.ton reno AquaBalance New Product

Colours:
white (200.3) and colours according to Weber colour chart

Storage:
The product can be stored at least 12 months in its original unopened packaging, if kept frost-free and protected from sunlight (at temperatures between +5 °C and +30 °C). Frost will destroy the product. After thawing it is not allowed to use it.

Fields of application

weber.ton reno AquaBalance is a fully-fledged silicone resin facade renovation paint.
Its physical principle of action prevents the growth of algae, fungi and fouling in a particularly effective and environmental-friendly way.
Particularly dedicated for the coating of all old overlay renders (top coats) and paints on facades (with and without AquaBalance technology).
For the colour design of several types of overlay renders: mineral top coats (range weber.star and weber.top) as well as silicate top coats, organic top coats and silicone resin top coats (range weber.pas).
For use outdoors.

Main features

• without biocidal film preservation
• hydrophilic surface with a balanced moisture management
• excellent and durable protection against formation of algae and fungi
• particularly resistant to microbiological fouling (green vegetation)
• highly open to water vapour diffusion
• easy application
• with excellent covering capacity
• insensitive to dirt
• solvent-free
• for renovation works

General notes

• Limits of use: do not use weber.ton reno AquaBalance on new biocide-containing renders or paints.
• In case of repair works of old renders, make sure that the repaired surfaces correspond in structure, hardness and porosity to those of the old render, in order to avoid shading and colour deviations after completion of painting works.
• The consumption figures mentioned in this document refer to the minimum layer thickness of the render. Due to specific substrates and application variations the consumption might vary. Exact consumption must be determined on a job site mock-up (trial area).
• Comply with the national guidelines and/or standards (for ex. DIN 18550); if not issued and if necessary, request technical advice.
• If possible, order the whole material quantity for the building site in one. If any buckets of different batch numbers, mix them with one another.

Special notes

• Thanks to its optimized moisture management, weber.ton reno AquaBalance offers very high and durable protection against algae and fungal growth.
• Pre-condition for achieving this protection is the correct application as described in this document.
• The highest level of protection against algae and fungi is achieved by using AquaBalance paint on AquaBalance render.
• Permanent high humidity level and dirt deposits for ex. in cases of application on socket areas of facades, faulty drainage and planting of trees close to buildings can promote the formation of algae and fungi.
• Residual microbiological fouling (green vegetation) on old substrates increases the risk of a new fouling; for this reason, all fouling marks must be completely removed prior to application.