Renovation of industrial floors
Maximum reliability for all stress cases.
Floor systems for industrial plants
Whether high-bay warehouses, underground car parks or production halls - intact, load-bearing and high-performance floors are a pre-requisite for smooth plant operations. Among other things, they serve as anchorage for machines, transport pathways or storage areas. Well-planned and executed industrial floors are therefore an economic factor.
weber.floor 4716 / weber.floor 4605 / weber.floor 4610
- rapid processing via mechanical application
- for levelling in high layer thicknesses
- EMICODE EC 1 Plus: very low emission of VOC
We prepare the ground for the next industrial revolution.
High-quality systems for every demand
Weber offers high-performance system solutions for mechanical, chemical and thermal loads - regardless of whether the stress is rather low or extremely high. Additional plus: all mineral industrial flooring products (screeds, levelling compounds and coatings) of Weber meet the highest requirements for protection against emissions and bear the corresponding seal EMICODE EC 1 PLUS.
Industry 4.0 starts with the floor
Refurbishment work in production premises is under high time pressure. Every day that production is at a standstill is a considerable cost factor. This is in particular true when it comes to replacing the floor, as other contractors can only start afterwards. With weber.floor 4605, Saint-Gobain Weber has developed a new high-strength industrial flow screed.
It is dedicated for use on uneven industrial floor surfaces (concrete or cement screed). The cement-based, polymer-modified screed mortar can be installed in layer thicknesses of 30 to 100 mm. It is pumpable, flow-grade and is open to foot traffic within a few hours.
For higher mechanical or chemical loads, the surface should be coated with an industrial floor coating, which Weber also offers.
Like all Weber floor products, weber.floor 4605 has a very low emission (EMICODE EC 1R PLUS).
For minimum production downtime
- pumpable and flow-grade
- quickly open to foot traffic
- low tendency to cracking and abrasion