34 results for your search "Problems & solutions - Renovation"
The textured lime plaster weber.cal 286 offers the easy possibility to give ugly tiles in bathrooms or kitchens between upper and lower cupboards a new decorative appearance.
Old facades are often damaged by moisture and salts that have migrated into the construction. Chalking surfaces, spalling plaster, moisture penetration, surface discolouration and cracking are the…
Mineral or organic plasters with non-elastic coatings can be over-worked with textured lime plasters without difficulty.
Mit hochwertigen Kalkstrukturspachteln ist es möglich festsitzende alte Glasfasertapeten zu überspachteln und so Wänden eine völlig neue Optik zu geben.
When renovating rooms, unpainted old plaster can be harmoniously integrated into the living environment with attractive new plaster surfaces. Different design options can be easily and individually…
With ETICS, cracked facades can be rendered whenever cracks with width changes of up to 2.5 mm are to be expected. Due to the high de-coupling effect of the insulation boards, the crack movements are…
The patented system weber.therm retec® offers the possibility to renovate damaged ETIC systems of the first generation in a permanent, economical and clean manner.
The combination of an electric underfloor heating system with a ceramic surface creates resistant and visually appealing floor surfaces that provide a pleasant living climate.
The modern bathroom combines functionality and aesthetics in individually designed rooms. The use of appropriate installation materials makes it possible to rationally transform old wet rooms into…
weber.plan 816 can be covered with tiles after already 24 hours. Quick use of the floor ensures that construction progresses quickly.
Through the use of polymer-modified special binders, the quick-setting levelling and repair mortar weber.plan 818 ensures low shrinkage and rapid hardening and, due to the early readiness for…
The lightweight underlay renders/plasters weber.dur 130, 132 and 136 are ideally suited for the fixing of ceramic tiles and slabs.
Excessive shrinkage during drying and curing, overstressing or impeded temperature expansion of screed or concrete substrates often leads to cracks.
Depending on the specific application, Weber offers functionally reliable solutions on all vibration-free floors and stairs in interior areas.
Glass tiles are a high-quality and very attractive installation material. For full appreciation of the beauty of this covering a number of points must be taken into account during their installation…
Saint-Gobain Weber offers solutions for faster and safer re-design of old tile coverings.
In renovation projects, the required heights for floor connections are often not available to install conventional hot water underfloor heating systems. Here, systems with a thin-layer build-up offer…
By combining, for ex. the floor self-levelling compound weber.plan 813-25 (1 - 25 mm) with the high-strength woven glass fiber mesh weber.sys 835 critical substrates and wooden floors can be safely…
With this system set-up, thin-layer balcony or terrace constructions with ceramic coverings can be executed.
The special liquid weber.sys 891 has extraordinary penetration properties, fills hollow spaces and can often be the solution to cost-intensive and time-consuming deconstruction.
With sufficient slope, the waterproofing and de-coupling membrane weber.tec 826 ideally allows renovation to be carried out in one day, as drying and waiting times are reduced to a minimum.
With a floor self-levelling compound, such as weber.plan 813-25, floor coverings can be optimally levelled and thus prepared for the installation of a top cover.
Epoxy and polyurethane resins are supplied in two matched components and are brought to reaction by intensive mixing.
Reactive epoxy resins have a very high impermeability to water vapour and at the same time an optimal bond with the mineral substrate.
The ready floor covering is only as good as the substrate allows. Therefore, check the substrate carefully and prepare it for the installation of the final flooring.
By combining the quick-setting and -drying floor levelling compound for renovation and timber floors weber.floor 4320 with the high-strength woven mesh weber.floor 4945, critical substrates and…
With a self-levelling levelling compound 5, such as the high flow smoothing mortar weber.floor 4031 or the ultra flow smoothing mortar weber.floor 4032, floors can be optimally and quickly levelled…
Almost all weber.floor levelling compounds are suitable for professional mixing and conveying technology. At the same time, these products are characterized by particularly easy processing.
In renovation projects, the required installation heights are usually not available for the assembly of conventional hot water underfloor heating systems. Here, thin-layer heating systems of well…
The optimal bonding of screeds, levelling compounds and coatings is based on careful substrate preparation.
Excessive shrinkage during drying and hardening, overstrain or hindered expansion due to temperature often lead to cracks of screeds or concrete substrates. In order to restore the load-bearing…
Flow screeds based on calcium sulphate (anhydrite) or cement are almost self-compacting during installation and therefore have consistently high flexural strengths over their whole thickness.
Screed constructions are among the most stressed components of a building. Depending on the requirements for certain properties, different floor build-ups are used.
The flow-grade concrete repair mortar and levelling compound weber.floor 4640