weber.dur 136
Product formerly named: maxit ip 18 L
weber.dur 136
Mineral lightweight render with mineral lightweight fillers as base coat or base coat and top coat
Product features
- water-repellent
- open to water vapour diffusion
- very low tension thanks to its low dynamic modulus of elasticity
- particularly suitable for heat-insulating masonry
Product advantages
- good non-sag behaviour
- purely mineral
- offers a nice and smooth surface
weber.dur 136 is used both indoors and outdoors on masonry surfaces (in accordance with DIN 1053). As base coat render with thick-layer and thin-layer mineral or organic overlay renders (finish top coats) from Weber, as well as an interior base coat render for ceramic wall tiles and slabs. weber.dur 136 can also be used as a base coat and top coat render with solvent-free or solvent-containing paints.
| Grain sizes | approx. 1 mm |
| Layer thickness | 10 - 20 mm |
| Water demand | approx. 8 l/30 kg |
| Flexural strength (28 days) | ≥ 1 N/mm² |
| Solid mortar density | < 1.300 kg/m³ |
| Water vapour diffusion resistance [µ] | ≤ 20 |
| Dynamic modulus of elasticity | < 4.000 N/mm² |
| Class of capillary water absorption | W2 |
| Reaction to fire [EN13501-1] | A1 |
| Strength class | CS II |
| Mortar Group (DIN 18550) | PII |
| Render type | Light plaster type I |
| Base color | natural grey |
| Application tool | render machine, smoothing trowel, notched trowel, broom, Rabbospeed, sponge float |
| Composition | cement, white hydrated lime, graded mineral aggregates, perlite, hydrophobing agents, additives for better workability and adhesion to substrate |
| water permeability rate w (DIN EN 1062-3) | < 0,5 kg/m²·√h |
Sustainability data sheet
