weber pluscalc Innenfarbe

Colours:
white and colours according to Weber colour chart

Storage:
The product can be stored for at least 12 months in its original unopened packaging, if kept frost-free and protected from direct sunlight (at temperatures between +5°C and +30°C). Frost will destroy the product. After thawing it is not allowed to be used.

Fields of application

weber pluscalc Innenfarbe is used on all mineral underlay plasters (base coat) based on lime (weber.cal), cement and lime cement (weber.dur) and clay (weber.mur) in all interior rooms.
Mainly dedicated as paint on weber pluscalc plasters.
For use indoors.

Main features

• free of plasticizers
• free of preservatives
• free of volatile organic compounds (VOC)
• solvent-free
• highly open to water vapour diffusion
• creates a healthy room climate
• good covering effect
• wet wipe-resistant
• dries to a matte finish
• low odour
• mainly for use on weber pluscalc plasters

General notes

• Limits of use: do not use weber pluscalc Innenfarbe on substrates containing gypsum and dispersion-based paints (indoor paints and latex paints).
• The consumption figures mentioned in this document refer to an application on a smooth plaster. Due to specific substrates and application variations the consumption might vary. Exact consumption must be determined on a job site mock-up (trial area).
• Temperature of air, materials and substrate during application and drying: ≥ +5°C
• Protect adjacent surfaces, like glass, wood or metal parts, before stating the painting works.

Special notes

• Do not add any foreign substances (except water) during application.