Coating of lime sandstones and aerated concrete (flat, glued) with lime plaster

Bonded interior masonry of lime sandstones and aerated concrete has a very high evenness. If the eventually existing electrical installations are located in the masonry, it can be very easily plastered with thin-layer textured lime plaster.

Simple & safe to the goal

  1. Application

    1. First, use the regulating primer weber.prim 405, in order to reduce the substrate absorption.

  2.  

    2. After drying the primer, the textured lime plaster weber.cal 286 is applied in a thickness of approx. 3 mm. Afterwards the woven mesh weber.therm 311 is embedded in wrinkle-free strips and with overlapping.

  3.  

    3. After sufficient waiting time (at least 1 day) apply weber.cal 286 as a topcoat and smooth with a fine or a coarse sponge float, depending on the required texture.

Find all our products near you in more than 2000 outlets