weber.floor 4817

Color:

white

Storage:

The product can be stored at least 15 months in its original unopened packaging, if kept dry, protected from humidity, and at temperatures between +5 °C and +30 °C.

Fields of application

weber.floor 4817 is ised for gluing textile floorings (tufting fabric with synthetic double backside or fleece backside, ball yarn, needle fleece, woven fabric), homogeneous/heterogeneous PVC floorings in sheets, CV floorings and linoleum floorings in sheets up to 2.5 mm thickness. For use indoors.

Main features

• EMICODE EC 1 PLUS: very low emission of volatile substances
• GISCODE D1: solvent-free
• with official approval Z-155.20-552 (Germany)
• excellent workability properties
• convenient for a wide range of floorings
• good bonding strength
• suitable for shampooing according to RAL 991 A2
• suitable on heated floor constructions
• suitable under chair castors according to EN 12529

General notes

• Comply with the national standards and/or guidelines relating to laying works of floorings. If not issued, and if necessary, request technical advice.
• Relative humidity rate during application and drying: 40 - 65 %; max. 75%
• Adapt adhesive and flooring to room climate before application; the flooring must be free from tension.
• The flash-off, open and setting times depend on the temperature (room air and substrate), relative humidity rate, substrate porosity, type of flooring and adhesive amount.
• Observe the technical data sheets of the flooring and all other used products.
• The adhesive is sensitive to frost.
• Close opened packagings tightly and use their content quickly.

Special notes

• Neither install, nor move heavy furniture or objects on the new flooring, as long as the adhesive has not fully set.
• Avoid high temperatures caused by solar radiation.