weber.floor 4880
Solvent-free contact adhesive for a variety of floorings
Colour:
creme
Storage:
The product can be stored at least 12 months in its original unopened packaging, if kept dry, protected from humidity, and at temperatures between +5 °C and +30 °C.
Fields of application
weber.floor 4880 is used for the contact bonding of a wide range of different materials, such as profiles, skirting boards, bases, textile floorings (tufting fabric with synthetic second backside or fleece backside, woven fabrics, needle fleece, ball yarn), homogeneous / heterogeneous PVC floorings in sheets, PVC design floorings (LVT), CV floorings, linoleum floorings in sheets and tiles and elastomer floorings with polished backside in sheets. Also suitable for repair bonding works, e.g. on inspection covers or in the transition areas, on walls and ceilings. For use indoors.
Product features
- EMICODE EC 1 PLUS: very low emission of volatile substances
- with official approval Z-155.20-547 (Germany)
- GISCODE D1: solvent-free
- very good rollability
- for a variety of different contact bonding applications
- very high contact bonding strength
- suitable for shampooing according to RAL 991 A2
- suitable on heated floor constructions
- suitable under chair castors according to EN 12 529
General notes
- Comply with the standards and/or national guidelines relating to laying works of floorings. If not issued, and if necessary, request technical advice.
- Relative humidity rate during application and drying: 40 - 65 %; max. 75%
- Adapt adhesive and flooring to room climate before application; the flooring must be free from tension.
- Observe the technical data sheets of the flooring and all other used products.
- The flash-off, open and setting times depend on the temperature (room air and substrate), relative humidity rate, substrate porosity, type of flooring and adhesive amount.
- The adhesive is sensitive to frost.
- Close opened packagings tightly and use their content quickly
Special notes
- Neither install, nor move heavy furniture or objects on the new flooring, as long as the adhesive has not fully set.
- Avoid high temperatures caused by solar radiation.
- The relative humidity rate during application and drying of linoleum floorings should be 40 - 65%.
- The substrate temperature during application and drying of rubber floorings should be at least 18 °C.