Ready-to-use and oven-dried silica sand for epoxy resin screed mixtures in thicknesses over 10 mm
The product can be stored for at least 5 years, if kept cool and dry.
Fields of application
weber.floor 4933 is used in combination with the epoxy resin primers weber.floor 4710 or weber.floor 4712 (EC 1 -very low emission) to produce epoxy resin mortars or screeds. For producing full-surface epoxy resin screeds or small-size repair mortars on floor surfaces, for all cases of mechanical and abrasion loads (stress classes I, II and III - heavy, medium and light). For use indoors and outdoors.
- good compactibility
- smooth processing
- maximum grain size of 3.0 mm
- The filling ratios mentioned in this data sheet are based on a material and substrate temperature + 20 °C. Higher resp. lower temperatures lead to different filling ratios.
- Other information such as substrate preparation, waiting times between operations etc. are mentioned in the technical data sheets of the epoxy resin primers weber.floor 4710 or weber.floor 4712 (EC 1).