- non-combustible thermal insulation, in particular for hospitals and schools
- renovation and drying-out of old facades
- thermal insulation for old and new buildings
ETICS weber.therm A 150
ETICS with mineral wool insulation boards and selected mineral overlay renders
- non-combustible thermal insulation, in particular for hospitals and schools
- renovation and drying-out of old facades
- thermal insulation of old and new buildings
- high permeability to diffusion of water vapour, fully mineral system
- highest resistance to fire - class A 1: non-combustible
- provides the best fire and acoustic protection
Substrate
The ETICS weber.therm 150 can be used on masonry and concrete.
Bonding
weber.therm 307
weber.therm 307 is a factory-mixed, mineral dry mortar according to EN 998-1.
Thermal insulation
For thermal insulation within this ETICS the mineral wool insulation boards weber.therm MW Facade are used.
Dowels
This ETICS should be anchored with the dowels weber.therm.
Reinforcement layer
weber.therm 310
As reinforcing mortar weber.therm 307 should be applied.
Insert the non-sliding fiberglass fabric weber.therm 310 into the reinforcing mortar.
Non-sliding fiberglass fabric with highly alkali-resistant coating
Overlay render (top coat)
For this ETICS it is recommended to use a thin-layer mineral render.
If necessary, the primer weber.prim 403 can be used.
Paint
In the case of thin-layer mineral, overlay renders a paint is recommended.
Eventually, the primer weber.prim 406 can be used. After drying the paint weber.ton 411 AquaBalance, weber.ton 412 AquaBalance or weber.ton Xtreme can be applied.
Without primer, there is the choice between the paint weber.ton 410 AquaBalance or weber.ton 414 AquaBalance.