- ideal for all timber constructions
- massive system build-up
- thermal insulation of old and new buildings
ETICS weber.therm eco
ETICS with soft wood fiber insulation boards and selected overlay renders
- ideal for all timber constructions
- massive system build-up
- thermal insulation of new and old buildings
- open to water vapour diffusion
- permeability to the diffusion of water vapour
- provides a good acoustic effect
- allows the easy laying of insulation boards
Subtrate
The ETICS weber.therm eco can be used on masonry, concrete and all timber constructions.
Bonding
weber.therm 301
In the case of masonry
Mineral bonding and reinforcing mortar within ETICS weber.therm A 200, B 100 and AK 500/BK 500, renovation mortar for old load-bearing renders
Bonding
weber.therm 370
In the case of concrete
High-performance mineral bonding mortar for critical substrates
Bonding
For the application of timber constructions, bonding is not necessary.
Thermal insulation
For thermal insulation within this ETICS on masonry and concrete (massive constructions) use the soft wood fiber insulation boards weber.therm HF Facade eco Massivbau. In the case of timber constructions, the soft wood fiber insulation boards weber.therm HF Facade eco Holzrahmenbau are used.
Dowels
This system must be anchored with the screw dowels weber.therm Schraubdübeln on masonry and concrete. For application on timber constructions, the wide back clips screw fasteners weber Schraubbefestiger STR H are used.
Reinforcement layer
weber.therm 301
Mineral bonding and reinforcing mortar within ETICS weber.therm A 200, B 100 and AK 500/BK 500, renovation mortar for old load-bearing renders
Woven mesh
weber.therm 310
for example
Non-sliding fibreglass fabric with highly alkali-resistant coating
Overlay render (top coat)
Whenever this ETICS is used on masonry or concrete, it is recommended to apply thin-layer overlay renders. Eventually, the primer weber.prim 403 can be used.
A mineral scratch render should be applied whenever this ETICS is used on timber constructions.
Paint
In the case of thin-layer mineral overlay renders, paint is recommended. There is the choice between weber.ton 411 AquaBalance or weber.ton 412 AquaBalance.
If necessary, the primer weber.prim 406 can be used.