ETICS weber.therm plus ultra

The ETICS weber.therm plus ultra can be used on masonry or on concrete.

In the case of masonry, the ETICS should be bonded with the bonding and reinforcing mortar weber.therm plus ultra.

In the case of concrete, weber.therm 370 should be used.

For thermal insulation within this ETICS the phenolic hard foam insulation boards weber.therm plus ultra RS 021 are used.

This system should be anchored with the dowels weber.therm.

As a reinforcement layer, the reinforcing mortar weber.therm plus ultra can be used.

The non-sliding fiberglass fabric should be embedded in the reinforcing mortar.

There is a choice between the coarse fiberglass fabric weber.therm 310 or the fine one weber.therm 311.

For this ETICS there is the choice between thick-layer mineral renders and thin-layer mineral, silicate renders or organic renders.

In the case of thin-layer renders, the primer weber.prim 403 can be used, if necessary.

In the case of thin-layer overlay renders, paint is recommended.

If necessary, the primer weber.prim 406 can be used. After drying the paint weber.ton 411 AquaBalance, weber.ton 412 AquaBalance or weber.ton Xtreme can be applied.

Without primer, there is the choice between weber.ton 410 AquaBalance or weber.ton 414 AquaBalance.