weber.tec Superflex Marine
weber.tec Superflex Marine
Highly-flexible reactive waterproofing and adhesive for tiles and slabs
This product can also be used for marine applications and is part of the Mineral system for tiles. The corresponding declaration of conformity, the MED certificate and a system description can be found here.
Colour:
blue-grey
Storage:
The product can be stored for at least 12 months in its original unopened packaging, if kept dry, cool and frost-free. Frost will destroy the liquid component. After thawing it is not allowed to be used.
Fields of application
weber.tec Superflex Marine is a highly-flexible, fastsetting, reactive setting, 2-component system consisting of tile adhesive and waterproofing. After hardening it is waterproof, frost-resistant, sulphate-resistant, UV- and ageing-resistant.
The 2-component mortar is mainly used on steel pre-treated with shopprimer, galvanised steel and aluminium and is convenient for the protection and renovation of weber Marine screeds, smoothing mortars and levelling and compounds as well as old tile coverings.
It is suitable as solid-bonded waterproofing under ceramic tiles and slabs in bathrooms and wetduty rooms (according to water loads W0-I
up to W3-I defined in the standard DIN 18534), in balconies and terraces (DIN 18531-5) and in swimming pools (DIN 18535).
In addition, the subsequent coverings can be installed on the previously waterproofed surface with the same material. The specific notched trowel weber.sys Abdichtund Verlegeglätter allows the application as waterproofing compound and as tile adhesive in one operation. This type of work is time- and cost-saving. As waterproofing material and as tile adhesive in one product, it hardens with low internal stress and minimal cracking. Due to its weather-independent fast curing and its smooth consistency and easy application weber.tec Superflex Marine offers the maximum safety against moisture damages for constructions subject to high water loads.
Main features
- highly flexible tile adhesive class S2 according to EN 12004
- open to light pedestrian traffic and to grouting works after 4 hours
- time- and cost-saving
- fast-setting, even at cooler temperatures
- weather-independent drying through reactive setting, even under air exclusion
- for shower rooms and flus-floor showers
- for galleys and spa facilities
- with approval for use in swimming pools (fulfills the German KSW recommendations relating to water quality)
- certified by DNV GL
- particularly creamy consistency and hence easy workability
- as protection of moisture-sensitive substrates
General notes
- All characteristics mentioned in this data sheet are based on a temperature of +23°C, without draught and a relative humidity rate of 50%.
- Lower temperatures slow down, higher temperatures accelerate the reaction process.
- Do not use material that has already stiffened.
- Refer to national standards and guidelines; if not issued and if necessary, refer to the German “Guidelines for Solid-bonded Waterproofing systems under Tiles” (AiV-F) and the current versions of ZDB leaflets.
- Existing structural joints in the substrate must be waterproofed with a sealing tape system, for e.g. weber.tec 828; they must be taken over in the top ceramic covering at the same places.
Special notes
- Do not use the material on frozen substrates, at freezing temperatures, or high temperatures (above +30°C substrate temperature).
- Protect the fresh waterproofing layer from direct sunlight, frost and rain.
- After 3 days, weber.tec Superflex Marine is permanently waterproof in underwater areas.
- The waterproofing layer is not suitable for direct use. Only use in combination with an appropriate protective layer (screed, tiles, or natural stones) is allowed.
