weber.Plattenkleber 2K

Drying time:
min. 3 days, depending on weather conditions

Storage:
The product can be stored at least 12 months in its original unopened packaging, if kept dry, cooland frost-free. Frost destroys the bitumen component. After thawing, it is not allowed to use it.

Fields of application

weber.Plattenkleber 2K is used for reliable bonding of perimetric insulation and protection boards below ground level on earthcontacting
basement walls. For application on bitumen waterproofing coatings, mineral waterproofing products and concrete. Convenient for bonding extruded and expanded polystyrene rigid-foam boards in all cases of water
load: ground damp, non-pressure and pressure water. For use outdoors.

Main features

• solvent-free
•  trowel-grade and non-sag
• high bonding strength
• quick drying
• suitable on dry and slightly damp substrates
• resistant to sulphate-containing water in the soil up to the “highly corrosive” level (up to 3.000 mg sulphate per litre of water) in accordance with DIN 4030
• resistant to frost and thawing salts after full drying

General notes

• All characteristics mentioned in this data sheet are given for a temperature of +20 °C, without draft and a relative rate of humidity of 70%.
• Comply with the national standards and/or guidelines; if not issued, and if requested, refer to the norm DIN 18533 (“Waterproofing of Ground-contacting Building Structures”), the “Guideline for Planning and Execution of Waterproofing Works with Polymer-Modified Bitumen Coatings (PMBC)” (4th edition, Dec. 2018, issued by the German Construction Chemicals Association) and the WTA leaflet “Retrospective Waterproofing of Ground-contacting Structures” (WTA = German Scientific and Technical Working Group for Building Conservation and Monument Preservation) and/or request technical advice.
• All characteristics mentioned in this data sheet are given for a temperature of +20 °C, without draft and a relative rate of humidity of 70%.

Special notes

• Do not add any foreign substances during mixing and application.
• Observe the Weber application tip “General guidelines for basement waterproofing works with thick-layer bitumen coatings and reactive coatings” for full information related to important issues like assessment of water load, thickness control, and all execution details.