weber.tec 935
Product formerly named: CERINOL STMHydraulically-setting and chloride-free plug mortar for stopping water inlet points
Colours:
grey-brown
Water demand:
approx. 2.4 - 2.8 liters / 10 kg bucket; partial mixing is recommended
Drying time:
approx. 20 - 30 minutes
Storage:
The product can be stored for at least 12 months in its original unopened packaging if kept dry and frost-free.
Fields of application
weber.tec 935 is used for the closing and waterproofing of joints, cracks and connections exposed to water pressure during or following application.
Thanks to its quick-setting and hydrophobic properties, cavities such as joints, cracks or water inlet points in concrete, screed and masonry can be caulked.
Also, as levelling mortar or filling mortar during injection works.
For use indoors and outdoors.
Main features
- quick-setting
- hydrophobic effect
- waterproof against pressure water
- fiber-reinforced
- chloride-free
- very good bonding strength
General notes
- All characteristics mentioned in this data sheet are given for a temperature of +20 °C without draught and a relative humidity rate of 70%.
- Warm water shortens the pot life.
- Do not pre-wet freshly applied material too much; a slight moistening of the mortar suffices to achieve waterproofing.
Specific notes
- Do not add any foreign substances during mixing and application.