weber.tec 945
Product formerly named: EUROLAN FK Inject2-comp. injection epoxy resin for force-fit injection or grouting of cracks in concrete and masonry
Colours:
transparent, yellowish
Storage:
The product can be stored for at least 12 months in its original unopened packaging if kept dry.
Fields of application
weber.tec 945 is used for monolithic crack injection through boreholes in concrete, like water reservoirs, swimming pools, sewage treatment plants, quay walls, foundations, shafts, all kinds of weight-bearing components of concrete and pre-stressed concrete in bridge and road constructions.
Also for injection or filling of cracks in masonries by pouring.
For use indoors and outdoors.
Main features
- good creeping properties due to low viscosity
- high chemical resistance
- free of non-reactive plasticizers
- excellent adhesion on the crack flanks
- high compressive and flexural strengths after curing
- protects the iron rods of reinforced concrete against water and air ingress, and thus against corrosion
General notes
- Before processing weber.tec 945, check the reasons of crack formation and, if necessary, eliminate them in order to exclude a new crack formation in other areas.
- Larger packagings and higher temperatures shorten the pot life.
- All characteristics mentioned in this data sheet refer to a temperature of +20 °C without draughts and a relative humidity rate of 50%.
- For higher injection pressure up to 200 bar, use screw packers.
- For lower injection pressure up to approx. 50 bar, use adhesive packers.
Special notes
- Do not add any foreign substances during mixing and application.
- Wear safety glasses and gloves during processing.