weber BaseGuard

Highly flexible, reactive and fast-setting, bitumen-free thick coating and flexible 2-comp. slurry for basement and waterproofing of socket areas

Add bookmark Find a stockist

Features and benefits

Product features

Fulfils the test requirements for Flexible polymermodified thick-layer waterproofing coatings (FPD)
EMICODE seal of approval: EC 1 PLUS
High dry residue approx. 95%
1.05 mm fresh layer thickness (corresponds to approx. 1.25 kg/m²) results in approx. 1 mm dry layer
For all mineral substrates, does not require a render layer on masonry
Can be covered with render or paint, frost/de-icing salt resistant, UV-resistant
Surface, socket, interior and horizontal waterproofing, levelling filler and bonding bridge in one
Enables basement and socket waterproofing from a single mould
Sprayable with peristaltic pump technology

Product advantages

Fast setting
Highly flexible & crack-bridging
Water pressure-tight

For sealing basements in old and new buildings and foundations in contact with the ground.
For sealing building plinths and floor-to-ceiling window and door connection profiles. As a horizontal barrier in and under walls. For subsequent interior sealing (negative sealing).
Also for bonding polystyrene rigid foam boards.

Technical values

Application temperature	5 - 30 °C
Application time	approx. 45 minutes
Density	approx. 1,2 kg/dm³
Dry residue	approx. 95 %
Mixing ratio	1:1 (A:B)
Application tool	bricklayer's tassel, smoothing trowel, spraying machine
Consistency	brush-grade, trowel-grade, spray-grade
Compressive strength	Class C2A
Crack bridging	≥ 2 mm (crack class R3-E)
Resistance to rain	approx. 4 hours* with 4 mm layer
Can be overworked	approx. 2 - 3 hours*
Bonding of protective panels	approx. 6 - 8 hours*
Full drying time	approx. 12 hours* with 3 mm dry layer thickness
Cleaning	when fresh with water
Composition	Polymer dispersion, cement, quartz sand, lightweight fillers, additives
*at 23°C/50%rlF.