weber.floor 4095

Water demand:
max. 5 liters / 25 kg

Storage:
The product can be stored for at least 6 months in its original unopened packaging if kept dry and protected from moisture.

Fields of application

weber.floor 4150 is used as bonded smoothing mortar for a wide range of floor substrates via manual or mechanical application. Also for domestic bathrooms and basement rooms with appropriate waterproofing, but not for wet-duty rooms.
For use indoors.

Main features

• EMICODE EC 1^PLUS: very low emission of volatile substances
• CE marking: CA − C25 − F7 (EN 13813)
• high flow performance
• resistant under chair castors (in accordance with EN 12529) when used in a layer thickness ≥ 2 mm under flooring materials
• can be mixed and pumped by machine
• can be used on heated floors
• very suitable for calcium sulphate screeds and mastic asphalt screeds  {.underline}
• very low tension during setting, even on critical substrates
• suitable for laying parquet when used in a layer thickness ≥ 2 mm

General notes

• Assess the levelling requirements beforehand.
• For application on floating constructions and heated screeds, all walls and upstands (pillars, columns etc.) within the floor should be separated with an 8 mm thick insulation foam strip; it must reach downwards from the substrate up to the upper edge of the final floor covering.
• The final surface must receive a covering, and is not allowed to be left without.
• If used as heating screed, request information for tailoredmade (special) solutions.
• In case of doubt regarding application, substrate or special structural features, request technical advice.
• Do not add any foreign substances during mixing and application.

Special notes

• Limits of use: do not use outdoors, on timber planks, chipboards, floating constructions (on separating membranes or on insulation boards).
• Manual application is only possible in a layer thickness ≥ 1 mm.