The allowed traffic load (variable or moving load on the floor) is a maximum ≤ 1 kN and the allowed area load is a maximum ≤ 2 kN/m².
The allowed pipe diameter is 12 - 16 mm.
Thin-layer heating floor on tacker sheets (with anchor clips) / dimple sheets or on velcro fleece systems New system
Fibre-reinforced thin-layer heating screed weber.floor 4180 on the thin-layer heating floor installation on tacker sheets (with anchor clips) / dimpled sheets or on velcro fleece systems.
The thin-layer underfloor heating constructions described in this recommendation sheet are special designs. The screed thicknesses may indeed deviate from the minimum layer thicknesses specified in standards.
Load-bearing construction
Eventually levelling with weber.floor smoothing mortar or levelling compound
Depending on the unevenness, weber.floor 4515 lightweight underlay, weber.floor 4045 floor levelling mortar or weber.floor 4520 is used.
Acoustic insulation strip
weber.floor 4960
weber.floor 4960 consists of impregnated glass fiber mesh, wrapped in PE foil.
Underlay for heating floor
Water-fed underfloor heating floor
Thin-layer heating screed
weber.floor 4180
Flow-grade calcium sulphate-based and fiber-reinforced thin-layer screed for thicknesses of 25 - 50 mm
weber.floor Flooring adhesive
New top layer
Note that hairline cracks can occur due to the building geometry and the substrate condition. These cracks represent an optical failure and have no detrimental influence on the floor's bonding strength and load-bearing capacity.
For floor covering with ceramics a system-compliant flexible cement-based tile adhesive like the multi-use flexible tile adhesive weber.xerm 861 should be used. For any other floor coverings use the appropriate weber.floor flooring glue.
