- non-combustible thermal insulation, in particular for hospitals and schools
- for highly mechanically stressed facade sections
- thermal insulation of old and new buildings
ETICS weber.therm Dickputz
Super thick-layer ETICS with mineral wool insulation boards and selected mineral overlay renders
- non-combustible thermal insulation, in particular for hospitals and schools
- for highly mechanically stressed facade sections
- thermal insulation of old and new buildings
- high permeability to the diffusion of water vapour, fully mineral system
- massive and super thick-layer
- provides the best fire and acoustic protection
Substrate
The ETICS weber.therm Dickputz can be used on masonry and on concrete.
Bonding
weber.therm 300
In case of masonry for example
Mineral, multi-use bonding and reinforcing mortar within Etics weber.therm A 100, A 200 and B 100 - Renovation mortar for old loadbearing renders
Bonding
weber.therm 370
In case of concrete
High-performance mineral bonding mortar for critical substrates
Thermal insulation
For thermal insulation within this ETICS the mineral wool lamella insulation boards weber.therm MW Facade are used.
Dowels
Eventually this system can be anchored with the dowels weber.therm.
Underlay render (base coat)
The thick-layer bonding and reinforcing mortar weber.therm Grundputz is applied on top of the insulation boards.
Reinforcement layer
weber.therm 302
Mineral bonding and reinforcing mortar within Etics weber.therm A 100, A 200 and B 100 - Renovation mortar for old load-bearing renders
Woven mesh
weber.therm 310
Non-sliding fibreglass fabric with highly alkali-resistant coating
Overlay render (top coat)
For this ETICS a thin-layer mineral render is recommended. There is the choice between weber.star 220 AquaBalance, weber.star 221 AquaBalance, weber.star 240 AquaBalance and weber.star 260 AquaBalance.
The primer eber.prim 403 can be used, if necessary.
Paint
In the case of thin-layer mineral overlay renders paint is recommended.
If necessary, the primer weber.prim 406 can be used. After drying the paint weber.ton 411 AquaBalance, weber.ton 412 AquaBalance or weber.ton Xtreme can be applied.
Without primer, there is the choice between eber.ton 410 AquaBalance or weber.ton 414 AquaBalance.
Technisches Merkblatt
weber.therm Dickputz WDVS - Printable datasheet (PDF - 592,77 KB)
Download • SendCase studies
