weber.therm 300

Professional plastering of wall panel heating systems

The following describes the plastering of wall panel heating systems that are installed directly on the wall.

Professional rendering/plastering of polystyrene formwork blocks

Depending on the surface's unevenness, polystyrene formworks blocks can be rendered/plastered after filling either with a normal reinforcing mortar or a special lightweight render.

Correct rendering on mineral building boards

Mineral renders can be easily applied also on mineral boards. It is important to respect the specified minimum layer thickness.

Application of thick-layer mineral scratch renders

Mineral scratch overlay render is a classic and timeless topcoat, that is currently experiencing a true revival. With the application tips described herebelow, you will achieve an optimal working ...

Application of smooth plasters

Smooth plasters can be applied both on basecoats and on external thermal insulation composite systems and also on insulating plasters.

Fine-graded textured coatings on weber.therm ETICS and weber.dur base coats

Creative architects, planners and builders have a growing interest in realizing fine-graded surfaces on base coat renders (underlay renders) or on external thermal insulation composite systems. With ...

Repair of cracked facades or joints with an ETICS

With ETICS, cracked facades can be rendered whenever cracks with width changes of up to 2.5 mm are to be expected. Due to the high de-coupling effect of the insulation boards, the crack movements are ...

Execution of internal insulation with insulating render

Interior insulation systems with mineral insulating plasters are an economical, safe, proven and durable alternative.

Measures in case of missing overbinding dimension

Professional plastering of masonry with high residual moisture

If the masonry has a high residual moisture and is only superficially dry (e.g when the chambers of the masonry elements were filled by rain during the construction period or in the particular case of...

Rendering of old brickwork, quarry natural stones (poorly absorbent substrates) and mixed masonries

Accurate rendering of Gisoton bricks

GISOTON bricks are heat-insulating and mainly consist of a core of polystyrene and expanded clay on the front side. Different surfaces require a tailored choice of renders for the reliable rendering ...

Correct rendering of XPS-R-insulation boards

In the case of heat-insulating masonry, thermal bridges (e.g. ceiling edges, lintels, columns, projections and skirting areas) are often formed with XPS-R insulation boards.

Rendering of chipboard concrete formwork blocks

Wood-chip cement formwork blocks are a particular substrate for rendering. In contrast to polystyrene formwork blocks, wood-chip concrete blocks can be rendered with conventional mortars. Two ...

Professional rendering/plastering of wood wool lightweight panels

There are several options for plastering magnesite-bonded wood wool lightweight board panels, the safest of which are shown here.

Renovation of old, uncracked and load-bearing facade renders

Renovation of cracked, non-painted mineral facade renders

The method can be used to renovate unpainted, mineral renders on facades if these only show render-related shrinkage and stress cracks. It must be ruled out that these are construction-related cracks ...

Repair of non-active cracks on facades

The repair of static (stationary or slightly moving) cracks is most safely carried out with an ETICS (see also application tip: "Repair of cracked facades or joints with an ETICS"). If only the render...

Renovation of old clinker facades

Correct rendering over half-timbered buildings

When renovating half-timbered buildings, damaged areas or weather sides exposed to heavy driving rain can be durably protected with a new render.

Post-applied thermal insulation in the preservation of historical monuments (interior and exterior)

Easy insulation of cellar ceilings and soffits

Execution of socket and perimeter areas in case of ETICS

Due to the generally higher mechanical and moisture-related loads, the building skirting and the earth-contacting area must be designed differently for ETICS. As in the facade, only harmonized ...

Non-combustible ETICS on the facade socket part with Foamglas insulation

Over-working of painted facades

This procedure takes into account the crack repair methods and additionally describes the testing of the existing coating.