weber.therm retec® 700

Application thickness:
6 mm - 8 mm

Water demand:
approx. 8 liters / 30 kg

Storage:
The product can be stored for up to 12 months in its original unopened packaging if stored dry and protected from moisture.

Fields of application

The system weber.therm retec® allows the renovation of Etics (external thermal insulation composite systems) of the first generation. Without dismantling of existing systems, old renders on facades or old Etics with organic renders are renovated and transformed into a sustainable mineral system.
weber.therm retec® 700 can be used as bonding and reinforcing mortar, if additional insulation is required.
Also for use as levelling mortar on the old-bearing renders, without additional insulation.
For use outdoors.

Main features

• resource conservation through continued use of existing insulation
• quick drying of existing insulation via the slot method
• high bonding strength on organic overlay renders
• open to diffusion of water vapour
• very good flow
• optimal properties from the point of view of building physics
• for use as bonding and reinforcing mortar within Etics weber.therm retec® with or without additional insulation

General notes

• Comply with the national guidelines and/or standards (for ex. DIN 18550); if not issued and if necessary, request technical advice.
• The consumption figures mentioned in this document refer to the minimum layer thickness of the mortar. Due to specific substrates and application variations the consumption might vary. Exact consumption must be determined on a job site mock-up (trial area).
• Protect the fresh mortar from too quick water evaporation, for ensuring an optimal hardening.