ETICS weber.therm A 200

The ETICS weber.therm A 200 can be used on masonry, concrete or panels.

In the case of masonry, the ETICS should be bonded with the bonding and reinforcing mortar weber.therm 300, weber.therm 301, weber.therm 302 or weber.therm 304.

In the case of concrete, weber.therm 370 should be used.

​​​​​​​In the case of panels,  weber.therm 309 should be used.

For thermal insulation within this ETICS the mineral wool lamella insulation boards weber.therm MW Facade or the mineral wool insulation boards weber.therm MW Facade are used.

Eventually this system can be anchored with the dowels weber.therm.

As a reinforcement layer the reinforcing mortar weber.therm 300, weber.therm 301 or weber.therm 302 can be used.

The non-sliding fiberglass fabric weber.therm 310 should be embedded in the reinforcing mortar.​​​​​​​

For this ETICS there is a choice between thin-layer mineral renders and silicate renders and thin-layer organic renders.

The primer weber.prim 403 can be used, if necessary.

In the case of thin-layer mineral overlay renders paint is recommended.

If necessary, the primer weber.prim 406 can be used. After drying the paint weber.ton 411 AquaBalance, weber.ton 412 AquaBalance or weber.ton Xtreme can be applied.

Without primer, there is the choice between weber.ton 410 AquaBalance or weber.ton 414 AquaBalance.