weber.plan 813-10
Product formerly named: DEITERMANN GM 10Quick-setting and self-levelling underlay for indoor floors for thicknesses 1 - 10 mm
Water demand:
approx. 6.2 liters / 25 kg
Application thickness:
1 mm - 10 mm
Storage:
The product can be stored at least 6 months (paper bag) or 18 months (plastified bag) in its original unopened packaging, if kept dry and protected from moisture.
Fields of application
weber.plan 813-10 is used as easy-flowing, quick-setting compound for levelling dimensionally stable substrates, such as cement screeds, calcium sulphate screeds, heated screeds, concrete and old load-bearing ceramic tiles. For use as bonded system in all cases. Suitable under floorings, such as ceramic tiles and natural stones, parquets, carpets, PVC, vinyl or linoleum. Due to its low-stress hardening and optimum flow properties, the product can be applied in a single operation up to a layer thickness of 10 mm. Its early accessibility enables rapid progress for the following works. For use indoors.
Main features
- EMICODE EC 1PLUS: very low emission of volatile substances
- CE marking: CT - C30 - F6 (EN 13813)
- self-levelling
- pumpable
- crack-free and stress-free during setting
- quickly ready for overlay with floorings
- high self-spreading performance, even in thin layers
- resistant under chair castors (in accordance with EN 12529) when used under floorings
General notes
- Do not process already stiffened material.
- All characteristics mentioned in this data sheet are based on a temperature of +23 °C without draught and a relative humidity rate of 50%.
- Higher temperatures and lower humidity rates accelerate, whilst lower temperatures and higher humidity rates delay the setting process.
- All walls and upstands (pillars, columns etc.) within the floor should be separated from the floor construction with a foam strip in order to stop stretching and ingress of the compound into the connection joints; it must reach downwards from the substrate up to the upper edge of the final floor covering.
- Do not apply on warm/heated surfaces.
Special notes
- Limits of use: do not use weber.plan 813-10 on electric heating systems, thin-layer warm water heating systems, wooden substrates (timber planks, OSB boards, chipboards) and mastics asphalt.
- Do not leave weber.plan 813-10 without any covering.
- Take over the existing joints in the substrate.
- In case of application in wet-duty rooms, special measures for waterproofing should be taken by applying bonded waterproofing layers, such as weber.tec 822 (liquid waterproofing foil) weber.tec Superflex D 2 (2-comp. reactive waterproofing slurry) or weber.xerm 844 (2-comp. waterproofing, tile adhesive and de-coupling system).