weber.tec 902

Drying time:
depending on weather and substrate: approx. 1-3 days

Storage:
The product can be stored for at least 24 months in its original unopened packaging if kept dry.

Fields of application

weber.tec 902 is used as primer on concrete prior to the application of new bitumen roofing felts (hot-welded membranes).
As primer for Weber solvent-based bitumen coatings, e.g. weber.tec 905, as well as for old bitumen roofing felts and mineral substrates.
For use outdoors.

Main features

• solvent-based
• very good bonding on substrate
• suitable for application at low temperatures
• spray-, roll- and brushable
• very good penetration

General notes

• Limits of use: do not use in food industry facilities.
• The solvents must have fully evaporated before laying hot-welded bitumen membranes or cold-applied bitumen felts.
• In case of application on non-ferrous metals (e.g. aluminum, copper or zinc), a full-cover with weber.tec 902 must be achieved; after drying repeat this operation to avoid pinholes.
• Prevent from strong sunlight.
• Higher temperatures and lower humidity rates accelerate, whilst lower temperatures and higher humidity rates delay drying.
• Observe the national regulations for working with solvent-based products.

Special notes

• Do not add any foreign substances during application.