Professional rendering/plastering of wood wool lightweight panels

There are several options for plastering magnesite-bonded wood wool lightweight board panels, the safest of which are shown here.

Simple & safe to the goal

  1. Preliminary works

    1. Standard boards: spray/apply the lime-cement render weber.dur 100 (with a full surface coverage) or strike off and comb the bonding and reinforcing mortar weber.therm 300 in 5 mm thickness.

  2. Application

    2. After an adequate waiting time, apply the lightweight lime-cement underlay render weber.dur 132.

  3.  

    3. After a sufficient waiting time apply bonding and reinforcing mortar, e.g. weber.therm 300 and lay the woven mesh weber.therm 310 on top of weber.dur 132.

  4. Special solution

    4. Specific boards (for ex. Heraklith BM): the bonding and reinforcing mortar weber.therm 300 is applied in a thickness of approx. 8 mm. Lay the woven mesh weber.therm 310 in the upper third of the mortar layer.

Find all our products near you in more than 2000 outlets