ETICS weber.therm style

Name: ETICS weber.therm style
Brand: Weber

Systemgrafik für das Wärmedämmverbundsystem weber.therm style mit Glas als Oberflächenfinish

The external thermal insulation composite systems weber.therm style make it possible to securely bond a wide variety of materials such as glass, basalt, corten steel or fair-faced concrete elements to an uninterrupted insulation layer. This opens up almost unlimited design possibilities.

Add bookmark Find a stockist

System options

Systemgrafiken für weber.therm style mit verschiedenen Oberflächen-Optionen

Substrate

The ETICS weber.therm style can be applied on masonry and concrete.

Bonding

In the case of masonry, the ETICS should be bonded with weber.therm 301.

In the case of masonry and concrete, weber.therm 370 should be applied.

Thermal insulation

For thermal insulation within this ETICS the mineral wool lamella insulation boards weber.therm MW 041 are used.

Dowels

The ETICS is anchored with the dowels weber.therm through the woven mesh (in the first reinforcement layer).

Reinforcement layer

As reinforcement layer the reinforcing mortar weber.therm 301 can be applied.

Two reinforcement layers - first layer with dowelling through the woven mesh (due to increased requirement for tolerances).

Woven mesh

The non-sliding fiberglass fabric weber.therm 310 is embedded in the reinforcing mortar.

Bonding

The materials to be applied to the system are bonded with the system-compliant special bonding mortar weber.therm style Klebemörtel 2K on the reinforcement layer.

Surface finish

There is a choice between glass, natural stones or porcelain stoneware elements for the top surface finish within the system weber.therm style.