weber.ton 414 AquaBalance

Colours:
white (200.3) and colours according to Weber colour chart

Storage:
The product can be stored for at least 12 months in its original unopened packaging, if kept frost-free and protected from sunlight (at temperatures between +5 °C and +30 °C). Frost will destroy the product. After thawing it is not allowed to use it.

Fields of application

weber.ton 414 AquaBalance is used as silicate egalizing paint providing excellent and durable protection against algae and fungi.
For the over-coating of unevenly dried coloured overlay renders/plasters: mineral top coats (range weber.star and weber.top) and silicate top coats (range weber.pas).
Particularly dedicated on all pre-said renders of AquaBalance technology.
For use indoors and outdoors.

Main features

• without biocidal film preservation
• without preservatives
• hydrophilic surface with a balanced moisture management
• excellent and durable protection against formation of algae and fungi
• highly open to water vapour diffusion
• easy application
• excellent covering capacity
• weather-resistant
• insensitive to dirt
• solvent-free
• for several mineral and organic substrates

General notes

• In case of repair works of old renders/plasters, make sure that the repaired surfaces correspond in structure, hardness and porosity to those of the old render/plaster, in order to avoid shading and colour deviations after completion of painting works.
• The consumption figures mentioned in this document refer to the minimum layer thickness
  of the render/plaster. Due to specific substrates and application variations the consumption might vary. Exact consumption must be determined on a job site mock-up (trial area).
• Comply with the national guidelines and/or standards (for ex. DIN 18550); if not issued and if necessary, request technical advice.
• If possible, order the whole material quantity for the building site in one. If any buckets of different batch numbers, mix them with one another.

Special notes

• Thanks to its optimized moisture management weber.ton 414 AquaBalance offers a very high and durable protection against algae and fungal growth.
• Pre-condition for achieving this protection is the correct application as described in this document.
• The highest level of protection against algae and fungi is achieved by using an AquaBalance paint on an AquaBalance render.
• Permanent high humidity level and dirt deposits for ex. in cases of application on socket areas of facades, faulty drainage and planting of trees close to buildings can promote the formation of algae and fungi.